BIOS EBDA/lowmem at: 0009fc00/0009fc00 Linux version 2.6.28-gentoo-r1 (root@nx8220) (gcc version 4.3.3 (Gentoo 4.3.3 p1.0, pie-10.1.5) ) #3 Tue Feb 3 19:17:42 EST 2009 KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD NSC Geode by NSC Cyrix CyrixInstead Centaur CentaurHauls Transmeta GenuineTMx86 Transmeta TransmetaCPU UMC UMC UMC UMC BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000005ffd0000 (usable) BIOS-e820: 000000005ffd0000 - 000000005ffefc00 (reserved) BIOS-e820: 000000005ffefc00 - 000000005fffb000 (ACPI NVS) BIOS-e820: 000000005fffb000 - 0000000060000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec02000 (reserved) BIOS-e820: 00000000fed20000 - 00000000fed9b000 (reserved) BIOS-e820: 00000000feda0000 - 00000000fedc0000 (reserved) BIOS-e820: 00000000ffb00000 - 00000000ffc00000 (reserved) BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) DMI 2.3 present. last_pfn = 0x5ffd0 max_arch_pfn = 0x100000 kernel direct mapping tables up to 377fe000 @ 7000-d000 ACPI: RSDP 000F6EF0, 0014 (r0 HP ) ACPI: RSDT 5FFEFC84, 0034 (r1 HP 0934 18080620 HP 1) ACPI: FACP 5FFEFC00, 0084 (r2 HP 0934 2 HP 1) ACPI: DSDT 5FFEFD50, 84E7 (r1 HP nc8200 10000 MSFT 100000E) ACPI: FACS 5FFFAE80, 0040 ACPI: APIC 5FFEFCB8, 005A (r1 HP 0934 1 HP 1) ACPI: MCFG 5FFEFD14, 003C (r1 HP 0934 1 HP 1) ACPI: SSDT 5FFF8237, 0371 (r1 HP HPQPpc 1001 MSFT 100000E) ACPI: Local APIC address 0xfec01000 647MB HIGHMEM available. 887MB LOWMEM available. mapped low ram: 0 - 377fe000 low ram: 00000000 - 377fe000 bootmap 00009000 - 0000ff00 (6 early reservations) ==> bootmem [0000000000 - 00377fe000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000100000 - 00006b69a8] TEXT DATA BSS ==> [0000100000 - 00006b69a8] #2 [00006b7000 - 00006ba000] INIT_PG_TABLE ==> [00006b7000 - 00006ba000] #3 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] #4 [0000007000 - 0000009000] PGTABLE ==> [0000007000 - 0000009000] #5 [0000009000 - 0000010000] BOOTMAP ==> [0000009000 - 0000010000] Zone PFN ranges: DMA 0x00000000 -> 0x00001000 Normal 0x00001000 -> 0x000377fe HighMem 0x000377fe -> 0x0005ffd0 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000000 -> 0x0000009f 0: 0x00000100 -> 0x0005ffd0 On node 0 totalpages: 393071 free_area_init_node: node 0, pgdat c0537ca0, node_mem_map c1000000 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 3967 pages, LIFO batch:0 Normal zone: 1744 pages used for memmap Normal zone: 221486 pages, LIFO batch:31 HighMem zone: 1296 pages used for memmap HighMem zone: 164546 pages, LIFO batch:31 Movable zone: 0 pages used for memmap ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfec01000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 68000000 (gap: 60000000:80000000) Built 1 zonelists in Zone order, mobility grouping on. Total pages: 389999 Kernel command line: root=/dev/hda3 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 4096 (order: 12, 16384 bytes) Fast TSC calibration using PIT Detected 1862.025 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 1552372k/1572672k available (3167k kernel code, 18988k reserved, 1185k data, 260k init, 663368k highmem) virtual kernel memory layout: fixmap : 0xfffac000 - 0xfffff000 ( 332 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) .init : 0xc0544000 - 0xc0585000 ( 260 kB) .data : 0xc0417efd - 0xc05404dc (1185 kB) .text : 0xc0100000 - 0xc0417efd (3167 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 Calibrating delay loop (skipped), value calculated using timer frequency.. 3724.05 BogoMIPS (lpj=1862025) Mount-cache hash table entries: 512 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: Intel(R) Pentium(R) M processor 1.86GHz stepping 08 Checking 'hlt' instruction... OK. Freeing SMP alternatives: 0k freed ACPI: Core revision 20080926 ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 net_namespace: 484 bytes HP Compaq Laptop series board detected. Selecting BIOS-method for reboots. NET: Registered protocol family 16 ACPI: bus type pci registered PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 PCI: MCFG area at e0000000 reserved in E820 PCI: Using MMCONFIG for extended config space PCI: Using configuration type 1 for base access ACPI: EC: Look up EC in DSDT ACPI: EC: non-query interrupt received, switching to interrupt mode ACPI: Interpreter enabled ACPI: (supports S0 S3 S5) ACPI: Using IOAPIC for interrupt routing ACPI: EC: GPE = 0x10, I/O: command/status = 0x66, data = 0x62 ACPI: EC: driver started in interrupt mode ACPI: PCI Root Bridge [C003] (0000:00) pci 0000:00:01.0: PME# supported from D0 D3hot D3cold pci 0000:00:01.0: PME# disabled pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold pci 0000:00:1c.1: PME# disabled pci 0000:00:1d.0: reg 20 io port: [0x3000-0x301f] pci 0000:00:1d.1: reg 20 io port: [0x3020-0x303f] pci 0000:00:1d.2: reg 20 io port: [0x3040-0x305f] pci 0000:00:1d.7: reg 10 32bit mmio: [0xc8c00000-0xc8c003ff] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled pci 0000:00:1e.2: reg 10 io port: [0x3100-0x31ff] pci 0000:00:1e.2: reg 14 io port: [0x3200-0x323f] pci 0000:00:1e.2: reg 18 32bit mmio: [0xc8c01000-0xc8c011ff] pci 0000:00:1e.2: reg 1c 32bit mmio: [0xc8c02000-0xc8c020ff] pci 0000:00:1e.2: PME# supported from D0 D3hot D3cold pci 0000:00:1e.2: PME# disabled pci 0000:00:1e.3: reg 10 io port: [0x3400-0x34ff] pci 0000:00:1e.3: reg 14 io port: [0x3500-0x357f] pci 0000:00:1e.3: PME# supported from D0 D3hot D3cold pci 0000:00:1e.3: PME# disabled pci 0000:00:1f.0: Force enabled HPET at 0xfed00000 pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: region 1100-113f claimed by ICH6 GPIO pci 0000:00:1f.1: reg 10 io port: [0x00-0x07] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03] pci 0000:00:1f.1: reg 20 io port: [0x3580-0x358f] pci 0000:01:00.0: reg 10 32bit mmio: [0xc0000000-0xc7ffffff] pci 0000:01:00.0: reg 14 io port: [0x2000-0x20ff] pci 0000:01:00.0: reg 18 32bit mmio: [0xc8800000-0xc880ffff] pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff] pci 0000:01:00.0: supports D1 D2 pci 0000:00:01.0: bridge io port: [0x2000-0x2fff] pci 0000:00:01.0: bridge 32bit mmio: [0xc8800000-0xc8bfffff] pci 0000:00:01.0: bridge 32bit mmio pref: [0xc0000000-0xc7ffffff] pci 0000:10:00.0: reg 10 64bit mmio: [0xc8000000-0xc800ffff] pci 0000:10:00.0: PME# supported from D3hot D3cold pci 0000:10:00.0: PME# disabled pci 0000:00:1c.0: bridge 32bit mmio: [0xc8000000-0xc83fffff] pci 0000:02:04.0: reg 10 32bit mmio: [0xc8400000-0xc8400fff] pci 0000:02:04.0: PME# supported from D0 D3hot D3cold pci 0000:02:04.0: PME# disabled pci 0000:02:06.0: reg 10 32bit mmio: [0xc8401000-0xc8401fff] pci 0000:02:06.0: supports D1 D2 pci 0000:02:06.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:02:06.0: PME# disabled pci 0000:02:06.2: reg 10 32bit mmio: [0xc8402000-0xc84027ff] pci 0000:02:06.2: reg 14 32bit mmio: [0xc8404000-0xc8407fff] pci 0000:02:06.2: supports D1 D2 pci 0000:02:06.2: PME# supported from D0 D1 D2 D3hot pci 0000:02:06.2: PME# disabled pci 0000:02:06.3: reg 10 32bit mmio: [0xc8408000-0xc8409fff] pci 0000:02:06.3: supports D1 D2 pci 0000:02:06.3: PME# supported from D0 D1 D2 D3hot pci 0000:02:06.3: PME# disabled pci 0000:02:06.4: reg 10 32bit mmio: [0xc840a000-0xc840a0ff] pci 0000:02:06.4: reg 14 32bit mmio: [0xc840b000-0xc840b0ff] pci 0000:02:06.4: reg 18 32bit mmio: [0xc840c000-0xc840c0ff] pci 0000:02:06.4: supports D1 D2 pci 0000:02:06.4: PME# supported from D0 D1 D2 D3hot pci 0000:02:06.4: PME# disabled pci 0000:02:06.5: reg 10 32bit mmio: [0xc840d000-0xc840dfff] pci 0000:02:06.5: reg 14 32bit mmio: [0xc840e000-0xc840efff] pci 0000:02:06.5: reg 18 32bit mmio: [0xc840f000-0xc840ffff] pci 0000:02:06.5: reg 1c 32bit mmio: [0xc8410000-0xc8410fff] pci 0000:02:06.5: supports D1 D2 pci 0000:02:06.5: PME# supported from D0 D1 D2 D3hot pci 0000:02:06.5: PME# disabled pci 0000:00:1e.0: transparent bridge pci 0000:00:1e.0: bridge 32bit mmio: [0xc8400000-0xc87fffff] bus 00 -> node 0 ACPI: PCI Interrupt Routing Table [\_SB_.C003._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C054._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C069._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C0CE._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C0DE._PRT] ACPI: PCI Interrupt Link [C0DA] (IRQs *10 11) ACPI: PCI Interrupt Link [C0DB] (IRQs 10 *11) ACPI: PCI Interrupt Link [C0DC] (IRQs 10 *11) ACPI: PCI Interrupt Link [C0DD] (IRQs *10 11) ACPI: PCI Interrupt Link [C0F0] (IRQs *10 11) ACPI: PCI Interrupt Link [C0F1] (IRQs 10 *11) ACPI: PCI Interrupt Link [C0F2] (IRQs *10 11) ACPI Exception (pci_link-0189): AE_NOT_FOUND, Evaluating _PRS [20080926] ACPI: Power Resource [C1D0] (on) ACPI: Power Resource [C1B2] (on) ACPI: Power Resource [C1B9] (on) ACPI: Power Resource [C1C9] (on) ACPI: Power Resource [C251] (off) ACPI: Power Resource [C252] (off) ACPI: Power Resource [C253] (off) ACPI: Power Resource [C254] (off) SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing hpet clockevent registered HPET: 3 timers in total, 0 timers will be used for per-cpu timer hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 hpet0: 3 comparators, 64-bit 14.318180 MHz counter pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 13 devices ACPI: ACPI bus type pnp unregistered system 00:00: iomem range 0x0-0x9ffff could not be reserved system 00:00: iomem range 0xe0000-0xfffff could not be reserved system 00:00: iomem range 0x100000-0x5fffffff could not be reserved system 00:0a: ioport range 0x500-0x57f has been reserved system 00:0a: iomem range 0xffb00000-0xffbfffff has been reserved system 00:0a: iomem range 0xfff00000-0xffffffff has been reserved system 00:0b: ioport range 0x4d0-0x4d1 has been reserved system 00:0b: ioport range 0x1000-0x107f has been reserved system 00:0b: ioport range 0x1100-0x113f has been reserved system 00:0b: ioport range 0x1200-0x121f has been reserved system 00:0b: iomem range 0xe0000000-0xefffffff has been reserved system 00:0b: iomem range 0xfec00000-0xfec000ff has been reserved system 00:0b: iomem range 0xfed20000-0xfed8ffff has been reserved system 00:0b: iomem range 0xfed90000-0xfed9afff has been reserved system 00:0c: iomem range 0xfeda0000-0xfedbffff has been reserved system 00:0c: iomem range 0xfec01000-0xfec01fff has been reserved pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 pci 0000:00:01.0: IO window: 0x2000-0x2fff pci 0000:00:01.0: MEM window: 0xc8800000-0xc8bfffff pci 0000:00:01.0: PREFETCH window: 0x000000c0000000-0x000000c7ffffff pci 0000:00:1c.0: PCI bridge, secondary bus 0000:10 pci 0000:00:1c.0: IO window: disabled pci 0000:00:1c.0: MEM window: 0xc8000000-0xc83fffff pci 0000:00:1c.0: PREFETCH window: disabled pci 0000:00:1c.1: PCI bridge, secondary bus 0000:20 pci 0000:00:1c.1: IO window: disabled pci 0000:00:1c.1: MEM window: disabled pci 0000:00:1c.1: PREFETCH window: disabled pci 0000:02:06.0: CardBus bridge, secondary bus 0000:03 pci 0000:02:06.0: IO window: 0x004000-0x0040ff pci 0000:02:06.0: IO window: 0x004400-0x0044ff pci 0000:02:06.0: PREFETCH window: 0x68000000-0x6bffffff pci 0000:02:06.0: MEM window: 0x6c000000-0x6fffffff pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02 pci 0000:00:1e.0: IO window: 0x4000-0x4fff pci 0000:00:1e.0: MEM window: 0xc8400000-0xc87fffff pci 0000:00:1e.0: PREFETCH window: 0x00000068000000-0x0000006bffffff pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:01.0: setting latency timer to 64 pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1c.0: setting latency timer to 64 pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:1c.1: setting latency timer to 64 pci 0000:00:1e.0: setting latency timer to 64 pci 0000:02:06.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 bus: 00 index 0 io port: [0x00-0xffff] bus: 00 index 1 mmio: [0x000000-0xffffffff] bus: 01 index 0 io port: [0x2000-0x2fff] bus: 01 index 1 mmio: [0xc8800000-0xc8bfffff] bus: 01 index 2 mmio: [0xc0000000-0xc7ffffff] bus: 01 index 3 mmio: [0x0-0x0] bus: 10 index 0 mmio: [0x0-0x0] bus: 10 index 1 mmio: [0xc8000000-0xc83fffff] bus: 10 index 2 mmio: [0x0-0x0] bus: 10 index 3 mmio: [0x0-0x0] bus: 20 index 0 mmio: [0x0-0x0] bus: 20 index 1 mmio: [0x0-0x0] bus: 20 index 2 mmio: [0x0-0x0] bus: 20 index 3 mmio: [0x0-0x0] bus: 02 index 0 io port: [0x4000-0x4fff] bus: 02 index 1 mmio: [0xc8400000-0xc87fffff] bus: 02 index 2 mmio: [0x68000000-0x6bffffff] bus: 02 index 3 io port: [0x00-0xffff] bus: 02 index 4 mmio: [0x000000-0xffffffff] bus: 03 index 0 io port: [0x4000-0x40ff] bus: 03 index 1 io port: [0x4400-0x44ff] bus: 03 index 2 mmio: [0x68000000-0x6bffffff] bus: 03 index 3 mmio: [0x6c000000-0x6fffffff] NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 6, 262144 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered NET: Registered protocol family 1 Microcode Update Driver: v2.00 , Peter Oruba highmem bounce pool size: 64 pages msgmni has been set to 1738 alg: No test for stdrng (krng) io scheduler noop registered io scheduler cfq registered (default) pci 0000:01:00.0: Boot video device pcieport-driver 0000:00:01.0: setting latency timer to 64 pcieport-driver 0000:00:01.0: found MSI capability pcieport-driver 0000:00:01.0: irq 287 for MSI/MSI-X pci_express 0000:00:01.0:pcie00: allocate port service pci_express 0000:00:01.0:pcie03: allocate port service pcieport-driver 0000:00:1c.0: setting latency timer to 64 pcieport-driver 0000:00:1c.0: found MSI capability pcieport-driver 0000:00:1c.0: irq 286 for MSI/MSI-X pci_express 0000:00:1c.0:pcie00: allocate port service pci_express 0000:00:1c.0:pcie02: allocate port service pci_express 0000:00:1c.0:pcie03: allocate port service pcieport-driver 0000:00:1c.1: setting latency timer to 64 pcieport-driver 0000:00:1c.1: found MSI capability pcieport-driver 0000:00:1c.1: irq 285 for MSI/MSI-X pci_express 0000:00:1c.1:pcie00: allocate port service pci_express 0000:00:1c.1:pcie02: allocate port service pci_express 0000:00:1c.1:pcie03: allocate port service intel_rng: FWH not detected Linux agpgart interface v0.103 ACPI: AC Adapter [C176] (on-line) ACPI: Battery Slot [C178] (battery present) ACPI: Battery Slot [C177] (battery absent) input: Power Button (FF) as /class/input/input0 ACPI: Power Button (FF) [PWRF] input: Sleep Button (CM) as /class/input/input1 ACPI: Sleep Button (CM) [C1F2] input: Lid Switch as /class/input/input2 ACPI: Lid Switch [C1F3] fan PNP0C0B:00: registered as cooling_device0 ACPI: Fan [C255] (off) fan PNP0C0B:01: registered as cooling_device1 ACPI: Fan [C256] (off) fan PNP0C0B:02: registered as cooling_device2 ACPI: Fan [C257] (off) fan PNP0C0B:03: registered as cooling_device3 ACPI: Fan [C258] (off) ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) processor ACPI_CPU:00: registered as cooling_device4 ACPI: Processor [C001] (supports 8 throttling states) thermal LNXTHERM:01: registered as thermal_zone0 ACPI: Thermal Zone [TZ1] (63 C) thermal LNXTHERM:02: registered as thermal_zone1 ACPI: Thermal Zone [TZ2] (47 C) thermal LNXTHERM:03: registered as thermal_zone2 ACPI: Thermal Zone [TZ3] (32 C) thermal LNXTHERM:04: registered as thermal_zone3 ACPI: Thermal Zone [TZ4] (40 C) Uniform Multi-Platform E-IDE driver piix 0000:00:1f.1: IDE controller (0x8086:0x266f rev 0x03) PIIX_IDE 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 piix 0000:00:1f.1: IDE port disabled piix 0000:00:1f.1: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x3580-0x3587 Probing IDE interface ide0... Switched to high resolution mode on CPU 0 hda: FUJITSU MHV2060AH, ATA DISK drive hdb: MATSHITADVD-RAM UJ-832S, ATAPI CD/DVD-ROM drive hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4 hda: UDMA/100 mode selected hdb: host max PIO4 wanted PIO255(auto-tune) selected PIO4 hdb: MWDMA2 mode selected ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide-gd driver 1.18 hda: max request size: 128KiB hda: 117210240 sectors (60011 MB) w/8192KiB Cache, CHS=65535/16/63 hda: cache flushes supported hda: hda1 hda2 hda3 hda4 ide-cd driver 5.00 ide-cd: hdb: ATAPI 24X DVD-ROM DVD-R/RAM CD-R/RW drive, 2048kB Cache Uniform CD-ROM driver Revision: 3.20 Driver 'sd' needs updating - please use bus_type methods firewire_ohci 0000:02:06.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 firewire_ohci: Added fw-ohci device 0000:02:06.2, OHCI version 1.10 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported ehci_hcd 0000:00:1d.7: irq 20, io mem 0xc8c00000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected uhci_hcd: USB Universal Host Controller Interface driver uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.0: irq 20, io base 0x00003000 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.1: irq 17, io base 0x00003020 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.2: irq 18, io base 0x00003040 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. PNP: PS/2 Controller [PNP0303:C1C6,PNP0f13:C1C7] at 0x60,0x64 irq 1,12 i8042.c: Detected active multiplexing controller, rev 1.1. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 serio: i8042 AUX3 port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice rtc_cmos 00:07: RTC can wake from S4 rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs EDAC MC: Ver: 2.1.0 Jan 31 2009 cpuidle: using governor ladder cpuidle: using governor menu usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver Advanced Linux Sound Architecture Driver Version 1.0.18rc3. Intel ICH 0000:00:1e.2: power state changed by ACPI to D0 Intel ICH 0000:00:1e.2: PCI INT A -> GSI 21 (level, low) -> IRQ 21 Intel ICH 0000:00:1e.2: setting latency timer to 64 Marking TSC unstable due to TSC halts in idle input: AT Translated Set 2 keyboard as /class/input/input3 Clocksource tsc unstable (delta = -351845742 ns) firewire_core: created device fw0: GUID a55a435100508b71, S400 usb 3-2: new full speed USB device using uhci_hcd and address 2 Synaptics Touchpad, model: 1, fw: 6.2, id: 0x25a0b1, caps: 0xa04793/0x300000 serio: Synaptics pass-through port at isa0060/serio4/input0 usb 3-2: configuration #1 chosen from 1 choice input: SynPS/2 Synaptics TouchPad as /class/input/input4 intel8x0_measure_ac97_clock: measured 50549 usecs intel8x0: clocking to 48000 ALSA device list: #0: Intel ICH6 with AD1981B at irq 21 TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 10 IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 NET: Registered protocol family 15 RPC: Registered udp transport module. RPC: Registered tcp transport module. ieee80211: 802.11 data/management/control stack, git-1.1.13 ieee80211: Copyright (C) 2004-2005 Intel Corporation ieee80211_crypt: registered algorithm 'NULL' ieee80211_crypt: registered algorithm 'WEP' ieee80211_crypt: registered algorithm 'CCMP' ieee80211_crypt: registered algorithm 'TKIP' Using IPI Shortcut mode kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 260k freed ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmpr ipw2200: Copyright(c) 2003-2006 Intel Corporation ipw2200 0000:02:04.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 ipw2200: Detected Intel PRO/Wireless 2915ABG Network Connection ipw2200 0000:02:04.0: firmware: requesting ipw2200-bss.fw fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel. input: PC Speaker as /class/input/input5 tg3.c:v3.94 (August 14, 2008) tg3 0000:10:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 tg3 0000:10:00.0: setting latency timer to 64 [fglrx] Maximum main memory to use for locked dma buffers: 1412 MBytes. [fglrx] vendor: 1002 device: 3150 count: 1 [fglrx] ioport: bar 1, base 0x2000, size: 0x100 pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:01:00.0: setting latency timer to 64 [fglrx] Driver built-in PAT support is enabled successfully [fglrx] module loaded - fglrx 8.57.2 [Jan 14 2009] with 1 minors ipw2200: Detected geography ZZA (11 802.11bg channels, 13 802.11a channels) tifm_7xx1 0000:02:06.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19 eth1: Tigon3 [partno(BCM95751M) rev 4101 PHY(5750)] (PCI Express) 10/100/1000Base-T Ethernet 00:15:60:b0:90:29 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1] eth1: dma_rwctrl[76180000] dma_mask[64-bit] yenta_cardbus 0000:02:06.0: CardBus bridge found [103c:0934] yenta_cardbus 0000:02:06.0: Enabling burst memory read transactions yenta_cardbus 0000:02:06.0: Using INTVAL to route CSC interrupts to PCI yenta_cardbus 0000:02:06.0: Routing CardBus interrupts to PCI yenta_cardbus 0000:02:06.0: TI: mfunc 0x01111b22, devctl 0x64 yenta_cardbus 0000:02:06.0: ISA IRQ mask 0x0cf8, PCI irq 18 yenta_cardbus 0000:02:06.0: Socket status: 30000006 pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #03 to #06 yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge I/O window: 0x4000 - 0x4fff yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge Memory window: 0xc8400000 - 0xc87fffff yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge Memory window: 0x68000000 - 0x6bffffff EXT3 FS on hda3, internal journal kjournald starting. Commit interval 5 seconds EXT3-fs warning: maximal mount count reached, running e2fsck is recommended EXT3 FS on hda4, internal journal EXT3-fs: mounted filesystem with ordered data mode. Adding 1465120k swap on /dev/hda2. Priority:-1 extents:1 across:1465120k ADDRCONF(NETDEV_UP): eth1: link is not ready [fglrx] Firegl kernel thread PID: 2119 [fglrx] Gart USWC size:694 M. [fglrx] Gart cacheable size:60 M. [fglrx] Reserved FB block: Shared offset:0, size:40000 [fglrx] Reserved FB block: Unshared offset:3f2c000, size:c2000 [fglrx] Reserved FB block: Unshared offset:3fee000, size:1000 [fglrx] Reserved FB block: Unshared offset:3fef000, size:1000 [fglrx] Reserved FB block: Unshared offset:3ff0000, size:10000 ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready eth0: no IPv6 routers present eth0: no IPv6 routers present [fglrx] It's not necessary to adjust system aperture on this ASIC [fglrx] It's not necessary to adjust system aperture on this ASIC [fglrx] Firegl kernel thread PID: 12710 [fglrx] Gart USWC size:694 M. [fglrx] Gart cacheable size:60 M. [fglrx] Reserved FB block: Shared offset:0, size:40000 [fglrx] Reserved FB block: Unshared offset:3f2c000, size:c2000 [fglrx] Reserved FB block: Unshared offset:3fee000, size:1000 [fglrx] Reserved FB block: Unshared offset:3fef000, size:1000 [fglrx] Reserved FB block: Unshared offset:3ff0000, size:10000 [fglrx] It's not necessary to adjust system aperture on this ASIC